CopterX 450SE is here!

Discussions related to electric helicopters.
Post Reply
User avatar
karlpenney
Posts: 426
Joined: Thu Sep 17, 2009 10:22 pm
Location: Halifax, NS

CopterX 450SE is here!

Unread post by karlpenney » Thu Jan 14, 2010 9:34 am

Ordered on Jan. 5th from ehirobo.com, shipped on the 6th (regular mail) and arrived on the 14th. Wow, that was fast! Will add some pics of the kit contents if I can figure out where the camera is. Still waiting for the motor and electronics from hobbycity.

Karl
Attachments
Wooden Main Blade Set
Wooden Main Blade Set
blades.jpg (34.68 KiB) Viewed 3475 times
Training Kit
Training Kit
trainingkit.jpg (41.62 KiB) Viewed 3482 times
Crash Repair Kit
Crash Repair Kit
crashkit.jpg (50.94 KiB) Viewed 3479 times
Canopy, Gear Set, Skids and Hardware
Canopy, Gear Set, Skids and Hardware
canopy.gears.skids.jpg (53.44 KiB) Viewed 3474 times
CF Frame, Head, Tail and Boom
CF Frame, Head, Tail and Boom
frame.head.tail.jpg (53.26 KiB) Viewed 3474 times
Top
User avatar
lawndart
Posts: 211
Joined: Thu Oct 02, 2008 1:27 pm
Location: Halifax

Re: CopterX 450SE is here!

Unread post by lawndart » Thu Jan 14, 2010 1:07 pm

Wow Karl, looks great. I'll be interested to hear about the quality and how well it goes together.

Dave
------d-a-v-e---------------- >}-
Top
User avatar
KrasherJack
Posts: 696
Joined: Fri Oct 03, 2008 7:26 am

Re: CopterX 450SE is here!

Unread post by KrasherJack » Mon Jan 18, 2010 6:41 pm

Nice Karl, I have some Gyro's if you need 1 for the Rudder karl.
What motor are you putting in?
Zoom..Zoom
Top
User avatar
karlpenney
Posts: 426
Joined: Thu Sep 17, 2009 10:22 pm
Location: Halifax, NS

Re: CopterX 450SE is here!

Unread post by karlpenney » Mon Jan 18, 2010 8:26 pm

This will be a low budget build - Turnigy Typhoon 2215H motor, HXT MG14 cyclic servos, MKS DS480 tail servo and HK401B gyro.

Karl
Top
User avatar
KrasherJack
Posts: 696
Joined: Fri Oct 03, 2008 7:26 am

Re: CopterX 450SE is here!

Unread post by KrasherJack » Tue Jan 19, 2010 11:34 am

Should'nt have any problem there... ;)
Al and I, plan an box order of 5 next month, with a neat Bell 206L body Fuse from them. So we will have lots of parts around.
I'm not sure if you have to mod the Tail drive gear in that 1, but it might be worth checking the RC build threads on it. 8-)
Zoom..Zoom
Top
User avatar
karlpenney
Posts: 426
Joined: Thu Sep 17, 2009 10:22 pm
Location: Halifax, NS

Re: CopterX 450SE is here!

Unread post by karlpenney » Sat Feb 13, 2010 6:45 pm

Had some time to finally start the assembly this morning. I took off one side of the frame to make it easier to install the servos. The frame screws needed to be threadlocked anyway, so no big deal. Got the servos in, frame assembled and skids installed now.
stripped frame.jpg
stripped frame.jpg (19.48 KiB) Viewed 3374 times
servos installed.jpg
servos installed.jpg (22.13 KiB) Viewed 3370 times
skids installed.jpg
skids installed.jpg (24.67 KiB) Viewed 3369 times
Top
astroflyer
Posts: 817
Joined: Tue Jan 27, 2009 5:14 pm

Re: CopterX 450SE is here!

Unread post by astroflyer » Sat Feb 13, 2010 9:04 pm

welcome to the dark side Karl. will we see that at the indoor thursday night???
Top
User avatar
karlpenney
Posts: 426
Joined: Thu Sep 17, 2009 10:22 pm
Location: Halifax, NS

Re: CopterX 450SE is here!

Unread post by karlpenney » Sat Feb 13, 2010 11:54 pm

Hmm, no, probably won't be ready for spool up for at least a couple more weeks yet.
Top
Post Reply

Return to “Helicopters”