DX6....

A place for info or problems concerning Transmitters, Receivers or Servos.
User avatar
steve
Posts: 999
Joined: Thu Oct 02, 2008 10:58 pm

DX6....

Unread post by steve » Sat Nov 06, 2010 10:44 am

For the Spectrum Experts here......

Are there any known "issues" with the DX6 transmitter ? It is the old one with the AR6000 receivers.

This radio will be going to a friend of mine but not until I have tried it and it is confirmed to work. I have no experience with 2.4 and would like to hear if there are concerns.

Thanks

Steve
Steve

User avatar
KrasherJack
Posts: 696
Joined: Fri Oct 03, 2008 7:26 am

Re: DX6....

Unread post by KrasherJack » Sat Nov 06, 2010 1:20 pm

Steve, drop Andrew Smith a note, he has alot of experience with the spectrum systems. 8-)
Zoom..Zoom

User avatar
AndrewS
Posts: 827
Joined: Thu Oct 02, 2008 8:23 am
Location: Bedford, Nova Scotia

Re: DX6....

Unread post by AndrewS » Sat Nov 06, 2010 1:52 pm

Nothing that I know of, Steve.
It is not a bad little radio, but too bad it can't be upgraded to DSM2. Make sure your friend knows it is only for park flyer aircraft(not a full range system) and the AR6000 is the only receiver it works with.
I still have mine... keeping it as a Buddy Box with my 9303.

Andrew
Andrew Smith,
HEFA 3
MAAC 76250

User avatar
karlpenney
Posts: 426
Joined: Thu Sep 17, 2009 10:22 pm
Location: Halifax, NS

Re: DX6....

Unread post by karlpenney » Sat Nov 06, 2010 2:01 pm

Also, the AR6000 is discontinued, so they may be hard to find.

User avatar
retiredVTT
Posts: 5340
Joined: Wed Oct 01, 2008 9:59 pm
Location: Bedford, NS,CANADA
Contact:

Re: DX6....

Unread post by retiredVTT » Sat Nov 06, 2010 2:37 pm

..poor thing is an orphan..!

Bill
Bill
HEFA #5
MAAC #13708

User avatar
steve
Posts: 999
Joined: Thu Oct 02, 2008 10:58 pm

Re: DX6....

Unread post by steve » Sat Nov 06, 2010 2:41 pm

Thanks Guys....!

The radio came with 3- AR6000 receivers and as far as I know they all work. I will be trying the radio out at one of the indoors on a small foamy that I can quickly check all the receivers.

Steve
Steve

Post Reply