New line of 3DPrinted motor mounts for electric models

A place to learn more about Electric RC Flying.
User avatar
retiredVTT
Posts: 5599
Joined: Wed Oct 01, 2008 9:59 pm
Location: Bedford, NS,CANADA
Contact:

New line of 3DPrinted motor mounts for electric models

Unread post by retiredVTT » Wed Mar 16, 2022 8:10 pm

https://innov8tivedesigns.com/

..the folks at Innov8tive Designs now carry a line of 3D printed Motor Mounts for electric models; these should help you get the proper distance between model and prop, when your using a cowl or need to get the motor adjusted to get the correct CG.

..another Innov8tive product from the "BadAss" guys..!
Bill
HEFA #5
MAAC #13708

KevinM
Posts: 78
Joined: Sat Jul 27, 2019 6:33 pm

Re: New line of 3DPrinted motor mounts for electric models

Unread post by KevinM » Fri Mar 18, 2022 5:12 pm

Thanks for the link Bill. That is a keeper in my Favourites. I checked out the 3D motor mounts and I thought " I can print them " and I already have for my 3D printed Das ugly stick, complete with down/offset thrust angle.
IMG_3192.JPG
The secret of flight is to aim at the ground and MISS

Post Reply