This tip is for all those building the Funcub and hooking up the Flaps...where the two flap servos operate together rather than opposite as with ailerons.
Yes, this can be accomplished by connecting each servo to a separate receiver channel and doing some programming ..IF you have a higher end radio....but a simple way to do it is to head on down to your local "Mighty Small Cars" hobby shop and pick up a "Y-Harness 6-inch Servo Reverser" for $11.95
This also allows you to use the recessed pocket in the wing that Multiplex provides for the servo, rather than having to butcher the wing to turn your servo around.
Bill
SERVO REVERSER available locally...
- retiredVTT
- Posts: 5599
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
SERVO REVERSER available locally...
Bill
HEFA #5
MAAC #13708
HEFA #5
MAAC #13708
- Coyote
- Posts: 495
- Joined: Fri Sep 24, 2010 10:59 pm
- Location: Dartmouth, Cole Harbour
Re: SERVO REVERSER available locally...
Tks Bill -
Great tip and the FUNCUB is a GREAT aircraft.
Great tip and the FUNCUB is a GREAT aircraft.
-----------------------------------------------------
Marc "Coyote" Cayouette
Halifax Electric Flyers Association (HEFA) # 054
MAAC #35128
DX9
Marc "Coyote" Cayouette
Halifax Electric Flyers Association (HEFA) # 054
MAAC #35128
DX9