SALE PENDING ** Big Heli Motor for Sale

[retiredVTT]

This is a new Hyperion HS4020-910 Motor that was designed for use in a large Helicopter, something with around 500mm blades.
As the pictures show it has a long protruding shaft up front, and also is to be "back mounted" which could be a problem if it was used in a plane.

The specs are as follows: KV is 910, can operate from 8 cells, continuous amp draw is 65 amps, continuous wattage is 1820, maximum current is 87 amps, maximum watts is 2455, weight is 284 grams (10 ounces), shaft is 5mm.

Xmas price is $50.00

[Ivan]

bill do you have any 1250kv to 1400kv motors laying around that will take 3-4s

[trevor]

Bill I will take this. Just need to get back to Nova Scotia to pick it up

[trevor]

Bill I will take this. Just need to get back to Nova Scotia to pick it up

[retiredVTT]

Ok Trevor, Let me know when your back, and we will meet.

[retiredVTT]

bill do you have any 1250kv to 1400kv motors laying around that will take 3-4s

Ivan, I need to know what amperage you want to draw.....and how heavy is the item it's going into. Like do you need 300 watts or 600watts.

[trevor]

Thanks Bill. Most likely next weekend due to covid restrictions. But I'm desperate for that exact motor

[retiredVTT]

10/4 Trevor ...sale is pending, no rush...!

[Ivan]

not sure about the watts but nothing that pulls more the 40amp look for something with low amp as i built a few lithi ion packs if you could send me a link to the motors you have i could look at the specs

[retiredVTT]

Ok Ivan, 40 amps on 4S will give you around 600 watts and on 3S about 470 watts. That should be good for a 3.5 to 4 lb plane so now I have something to go on. I'll have a look and get back to you.