Spektrum Transmitter wanted

Got something to sell or trade?
Lexflyer2022
Posts: 26
Joined: Wed Jun 15, 2022 12:58 pm
Location: Lawrencetown, NS

Spektrum Transmitter wanted

Unread post by Lexflyer2022 » Tue Aug 23, 2022 2:00 pm

Hi there pilots,

I am looking to buy a Spektrum NX6 or NX8 preferably. If anyone has a line on a used one I would be grateful to hear back.
Thank you and long live RC.

Lexflyer2022
Posts: 26
Joined: Wed Jun 15, 2022 12:58 pm
Location: Lawrencetown, NS

Re: Spektrum Transmitter wanted

Unread post by Lexflyer2022 » Tue Aug 30, 2022 9:22 pm

Hello all of you rc pilots,

I have taken a different direction in the search for radios. I have purchased a RadioMaster. I'll either get on to using it or strt flying rubber powered gliders. That is like when I was 10. 25 cents at the 5 to a dollar store.

Cheers,

Lex

User avatar
retiredVTT
Posts: 5547
Joined: Wed Oct 01, 2008 9:59 pm
Location: Bedford, NS,CANADA
Contact:

Re: Spektrum Transmitter wanted

Unread post by retiredVTT » Thu Sep 01, 2022 5:20 pm

https://www.horizonhobby.com/spektrum-c ... nsmitters/

Horizon is now selling "used", but not abused, Transmitters ....I did not know that..!
Bill
HEFA #5
MAAC #13708

DoverSail
Posts: 126
Joined: Thu May 07, 2020 4:18 pm

Re: Spektrum Transmitter wanted

Unread post by DoverSail » Tue Sep 13, 2022 10:10 am

Lexflyer2022 wrote:
Tue Aug 30, 2022 9:22 pm
Hello all of you rc pilots,

I have taken a different direction in the search for radios. I have purchased a RadioMaster. I'll either get on to using it or strt flying rubber powered gliders. That is like when I was 10. 25 cents at the 5 to a dollar store.

Cheers,

Lex
You will love the Radiomaster! It is a very good value and the things you can do with it are really incredible. Basically anything you can think of can be mixed, programmed, whatever. My Radiomaster has better conversational skills than I do. If you need any help setting things up, I use a RM, so does John, and I am sure either of us would be happy to help.

I also highly recommend checkig out this playlist of introduction videos for OpenTX:
https://www.youtube.com/watch?v=ye9Yaj_ ... ZG14zyMYYt

Post Reply