E-flite Apprentice...
- Enforcer
- Posts: 1229
- Joined: Fri Apr 10, 2009 4:58 pm
E-flite Apprentice...
As a newbie, I whole heartedly recommend the E-flite Apprentice if you are looking for a 4 channel trainer. Here is why I agree with RC GROUPS and RC UNIVERSE, who state in their respective reviews, that this is the "perfect trainer", "we can find no fault with this model"...
1) it is large enough to be seen at a distance
2) VERY forgiving (will right itself and flies very well at slow speeds)
3) can be flown in fairly high winds (10 - 15 MPH)
4) powerful 15 size motor and quality electrics (2.4 GHz Spectrum DX5e)
5) will glide forever
6) did I mention it's VERY forgiving?
Murray
1) it is large enough to be seen at a distance
2) VERY forgiving (will right itself and flies very well at slow speeds)
3) can be flown in fairly high winds (10 - 15 MPH)
4) powerful 15 size motor and quality electrics (2.4 GHz Spectrum DX5e)
5) will glide forever
6) did I mention it's VERY forgiving?
Murray
- retiredVTT
- Posts: 5601
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
Re: E-flite Apprentice...
Here is a link to the RCGroups thread on the above mentioned plane...The Apprentice from E-Flite.
It is definitely a winner, comes very complete with Spektrum radio, 3 cell lipo pack and Charger, ready to fly ..! (sugg $299.US)
http://www.rcgroups.com/forums/showthre ... apprentice
Bill
It is definitely a winner, comes very complete with Spektrum radio, 3 cell lipo pack and Charger, ready to fly ..! (sugg $299.US)
http://www.rcgroups.com/forums/showthre ... apprentice
Bill
Bill
HEFA #5
MAAC #13708
HEFA #5
MAAC #13708
- JohnOSullivan
- Posts: 1219
- Joined: Wed Oct 01, 2008 9:50 pm
- Location: Dartmouth, Nova Scotia
- Contact:
Re: E-flite Apprentice...
I just briefly saw Murray's Apprentice yesterday (though not in flight) and was very impressed.
Its area at 525 sq inches is the same as my Eyespy, and has a similar wing loading (10 to 12 oz/sq ft) varying with payload (FMA Copilot, Attopilot and Camera) .
The Eyespy will Thermal quite well and with an AXI 2808/24 will climb at 1250 ft per minute when needed.
The Apprentice as a high winged trainer type model should perform as a sedate beginners type model. Although a little bigger than the usual park flier, it will provide a bit more heavy wind capability, and stability. It is still light enough for gentle "non-threatening" performance.
Best of flying with it.
John
Its area at 525 sq inches is the same as my Eyespy, and has a similar wing loading (10 to 12 oz/sq ft) varying with payload (FMA Copilot, Attopilot and Camera) .
The Eyespy will Thermal quite well and with an AXI 2808/24 will climb at 1250 ft per minute when needed.
The Apprentice as a high winged trainer type model should perform as a sedate beginners type model. Although a little bigger than the usual park flier, it will provide a bit more heavy wind capability, and stability. It is still light enough for gentle "non-threatening" performance.
Best of flying with it.
John
John
MAAC #5401 L
MACI (Ireland) IRL#26
MAAC #5401 L
MACI (Ireland) IRL#26
- retiredVTT
- Posts: 5601
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
Re: E-flite Apprentice...
picture from RCGroups..
Bill
Bill
- Attachments
-
- DSC02778-vi.jpg (42.51 KiB) Viewed 5705 times
Bill
HEFA #5
MAAC #13708
HEFA #5
MAAC #13708
- Enforcer
- Posts: 1229
- Joined: Fri Apr 10, 2009 4:58 pm
Re: E-flite Apprentice...
Hi guys!
Last night, I upgraded the landing gear with bigger "3 in." tires . A HUGE thanks to Jack Davidson, who very graciously "gave" me several tires for the Apprentice and my Super Cub, along with several other items I can use. I used the tires from the Cub to upgrade one of my SkyFly 2 planes as well. I must say, they all look very aggressive with their new shoes. Can't wait to get them to the field and get your opinions.
Also, I purchased another plane yesterday from Don Menchions. It is a Hanger 9, Pulse XT-60. I will keep this one in the box for now... for obvious reasons! But, when I do get it flying, it will be powered with batteries, not glow! I hope to be able to share the maiden with all of you when the time comes. I realize that this plane's size may be a point of concern for you because of the flying area at SP being relatively small, so I "promise" to get permission from you. I WILL NOT fly it even once unless I get a unanimous vote to do so!
BTW, In case anyone is interested, I have my application filled out and the dues set aside. Please let me know whom to give it too. Oh, I already have my MAAC card for 2009.
Thanks!
Murray
Last night, I upgraded the landing gear with bigger "3 in." tires . A HUGE thanks to Jack Davidson, who very graciously "gave" me several tires for the Apprentice and my Super Cub, along with several other items I can use. I used the tires from the Cub to upgrade one of my SkyFly 2 planes as well. I must say, they all look very aggressive with their new shoes. Can't wait to get them to the field and get your opinions.
Also, I purchased another plane yesterday from Don Menchions. It is a Hanger 9, Pulse XT-60. I will keep this one in the box for now... for obvious reasons! But, when I do get it flying, it will be powered with batteries, not glow! I hope to be able to share the maiden with all of you when the time comes. I realize that this plane's size may be a point of concern for you because of the flying area at SP being relatively small, so I "promise" to get permission from you. I WILL NOT fly it even once unless I get a unanimous vote to do so!
BTW, In case anyone is interested, I have my application filled out and the dues set aside. Please let me know whom to give it too. Oh, I already have my MAAC card for 2009.
Thanks!
Murray
- retiredVTT
- Posts: 5601
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
Re: E-flite Apprentice...
Whoa..big fellow..!
The Hanger 9, Pulse XT-60 is definitely no "trainer" Murray, but a very nice big aerobatic aircraft...that takes 6S lipo packs..!
RCGroups thread here..
http://www.rcgroups.com/forums/showthre ... t=pulse+60
Specs:
Wingspan:70 in (1778mm)
Overall Length:57.3 in (1455mm)
Wing Area:885 sq in (57.10 sq dm)
Flying Weight:7–8 lb (3.18 kg–3.63 kg)
Engine Size:91–1.00 4-stroke, 60–.75 2-stroke
Motor Size:Power 60 BL Outrunner
Radio:4-channel with 5 servos (4 for electric option)
Bill
The Hanger 9, Pulse XT-60 is definitely no "trainer" Murray, but a very nice big aerobatic aircraft...that takes 6S lipo packs..!
RCGroups thread here..
http://www.rcgroups.com/forums/showthre ... t=pulse+60
Specs:
Wingspan:70 in (1778mm)
Overall Length:57.3 in (1455mm)
Wing Area:885 sq in (57.10 sq dm)
Flying Weight:7–8 lb (3.18 kg–3.63 kg)
Engine Size:91–1.00 4-stroke, 60–.75 2-stroke
Motor Size:Power 60 BL Outrunner
Radio:4-channel with 5 servos (4 for electric option)
Bill
- Attachments
-
- HAN4130-GAL1.jpg (29.49 KiB) Viewed 5683 times
Bill
HEFA #5
MAAC #13708
HEFA #5
MAAC #13708
- Enforcer
- Posts: 1229
- Joined: Fri Apr 10, 2009 4:58 pm
Re: E-flite Apprentice...
Hi Bill!
This plane has actually been described as more of a "sport" plane. Not by the manufacturer, but by people who fly it. Is has been described by them as a "forgiving" second "sport category" plane, that can be used to do "adequate" aerobatics. Also, it has a noticeable dihedral which as you know makes any plane much more stable.
It will be interesting to see how long it takes me to gain the confidence needed to gage this for myself! Don't worry, I'm not curious enough to be stupid! But, I can look at it and wonder at least, as it sits on my basement floor all shiny and new... and purdy like!
BTW, it's not that big... relative to the GIANT size planes! Besides, the guy in the picture is only 4' 2"!
This plane has actually been described as more of a "sport" plane. Not by the manufacturer, but by people who fly it. Is has been described by them as a "forgiving" second "sport category" plane, that can be used to do "adequate" aerobatics. Also, it has a noticeable dihedral which as you know makes any plane much more stable.
It will be interesting to see how long it takes me to gain the confidence needed to gage this for myself! Don't worry, I'm not curious enough to be stupid! But, I can look at it and wonder at least, as it sits on my basement floor all shiny and new... and purdy like!
BTW, it's not that big... relative to the GIANT size planes! Besides, the guy in the picture is only 4' 2"!
Murray Wheten
“My philosophy, like color television, is all there in black and whiteâ€
Monty Python
“My philosophy, like color television, is all there in black and whiteâ€
Monty Python
- Enforcer
- Posts: 1229
- Joined: Fri Apr 10, 2009 4:58 pm
Re: E-flite Apprentice...
I thought you might like a look at my other trainer. I really love the look of this plane. I think it's beautiful!
Murray Wheten
“My philosophy, like color television, is all there in black and whiteâ€
Monty Python
“My philosophy, like color television, is all there in black and whiteâ€
Monty Python
- retiredVTT
- Posts: 5601
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
Re: E-flite Apprentice...
Ah yes, that's a beauty...should fly well too.
Bill
Bill
Bill
HEFA #5
MAAC #13708
HEFA #5
MAAC #13708
- Enforcer
- Posts: 1229
- Joined: Fri Apr 10, 2009 4:58 pm
Re: E-flite Apprentice motor...
Many people have asked me what type of motor is in the Apprentice. I have been telling them the E-flite Power 15 (.15 glow equivalent). That is "not" correct. The Power 15 has a 940 Kv and cost $89.00 US. The BL 15 outrunner found in the Apprentice has an 840 Kv rating and cost 69.00 US.
Murray
Murray
Murray Wheten
“My philosophy, like color television, is all there in black and whiteâ€
Monty Python
“My philosophy, like color television, is all there in black and whiteâ€
Monty Python