Mirage 2000 (by Fly-Fly) project..
- retiredVTT
- Posts: 5601
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
Mirage 2000 (by Fly-Fly) project..
Here is a link to my "favorite video from 2018"..!
https://www.youtube.com/watch?v=AjAnevrhC20
I have watched this video many times and can't get the grin off my face for many moments after viewing. First of all check out the location..we should all be so fortunate to have a flying field like this. However, it was a surprise the first time I saw the "milk truck" vehicle coming across the end of the flying area..!
The next thing that caught my attention was how easily this EDF was launched; no major loss of altitude upon hand launching....Bonus..!
The overall speed, and climb, and finally the smooth landing, all said one thing...."gotta have one of these..!"
..more to follow,
https://www.youtube.com/watch?v=AjAnevrhC20
I have watched this video many times and can't get the grin off my face for many moments after viewing. First of all check out the location..we should all be so fortunate to have a flying field like this. However, it was a surprise the first time I saw the "milk truck" vehicle coming across the end of the flying area..!
The next thing that caught my attention was how easily this EDF was launched; no major loss of altitude upon hand launching....Bonus..!
The overall speed, and climb, and finally the smooth landing, all said one thing...."gotta have one of these..!"
..more to follow,
Bill
HEFA #5
MAAC #13708
HEFA #5
MAAC #13708
- retiredVTT
- Posts: 5601
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
Re: Mirage 2000 (by Fly-Fly) project..
So the order was placed and we await delivery...this will just be for the airframe and probably a cheap 90mm fan. I fully expect to upgrade the fan, add a 100amp ESC, and fly with either a 5S or 6S lipo pack. Couple of "strong" servos will complete the accessories required. (Speaking of servos, I have some info on a "Tactic 25" servo that has a ton of torque, at a very reasonable price of $US19.00, and only weighs 25 grams. Check them out at Tower Hobby. I got this info from a post by Gary Wright, a long time flyer from Florida, who designed the original "E3D model", back around 2002. When Gary speaks RC...people listen..!)
General Hobby
------------------------------------------------------
Order Number: 403602018
Date Ordered: Wednesday 10 October, 2018
Products
------------------------------------------------------
1 x Flyfly Mirage 2000 90mm EDF Electric RC Jet Kit Version ..
------------------------------------------------------
United States Postal Service (Priority Mail International®)
General Hobby
------------------------------------------------------
Order Number: 403602018
Date Ordered: Wednesday 10 October, 2018
Products
------------------------------------------------------
1 x Flyfly Mirage 2000 90mm EDF Electric RC Jet Kit Version ..
------------------------------------------------------
United States Postal Service (Priority Mail International®)
- Attachments
-
- mirage-2000-flyfly-1.jpg (17.96 KiB) Viewed 2489 times
Bill
HEFA #5
MAAC #13708
HEFA #5
MAAC #13708
- timberman
- Posts: 46
- Joined: Tue Apr 10, 2012 10:41 am
- Location: West Chezzetcook
Re: Mirage 2000 (by Fly-Fly) project..
Very nice Bill, I was looking very close at the mirage 2000, but decided to go for the BeaHawk made by FlyFly , from Hobby88.com . Mine is 6-cell ,100Aesc.
Dennis- retiredVTT
- Posts: 5601
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
Re: Mirage 2000 (by Fly-Fly) project..
Hi Dennis,
Your "hawk" will be a nice one, for sure. The large delta wing on the Mirage was a factor on my decision. Should help it land on our smaller Shannon airstrip.
I don't plan to use any wheels, just a nice protective covering of clear, thick, poly on the bottom. MSC sell a nice 2 sheet pkg that the car guys use.
Your "hawk" will be a nice one, for sure. The large delta wing on the Mirage was a factor on my decision. Should help it land on our smaller Shannon airstrip.
I don't plan to use any wheels, just a nice protective covering of clear, thick, poly on the bottom. MSC sell a nice 2 sheet pkg that the car guys use.
Bill
HEFA #5
MAAC #13708
HEFA #5
MAAC #13708
-
- Posts: 193
- Joined: Sun Mar 01, 2015 5:58 pm
- Location: Beaver Bank, NS
Re: Mirage 2000 (by Fly-Fly) project..
Hi guys,
For those of us with shallower pockets, here is the 70 mm EDF BAe Hawk I recently acquired from Hobby King:
https://hobbyking.com/en_us/bae-hawk-re ... e-epo.html
And here it is Monday morning at the Beaver Bank Road airfield. Note the tail rudder and duct tape canopy securements are my own modifications... Jeff
For those of us with shallower pockets, here is the 70 mm EDF BAe Hawk I recently acquired from Hobby King:
https://hobbyking.com/en_us/bae-hawk-re ... e-epo.html
And here it is Monday morning at the Beaver Bank Road airfield. Note the tail rudder and duct tape canopy securements are my own modifications... Jeff
MAAC 85077
Tarot 450 Pro V2, H-King Voltigeur, E-Flite Ultimate 2, BAe Hawk EDF, H-King Wargo MX2, E-Flite Timber X, E-Flite UMX Timber X, E-Flite UMX A-10, Eachine E160, Eachine E180, YX F180 V2, MJX Bugs 3
Transmitter: RadioMaster TX16S
Tarot 450 Pro V2, H-King Voltigeur, E-Flite Ultimate 2, BAe Hawk EDF, H-King Wargo MX2, E-Flite Timber X, E-Flite UMX Timber X, E-Flite UMX A-10, Eachine E160, Eachine E180, YX F180 V2, MJX Bugs 3
Transmitter: RadioMaster TX16S
- bdg
- Posts: 1430
- Joined: Mon Mar 12, 2012 11:59 am
Re: Mirage 2000 (by Fly-Fly) project..
Jeff.... DO TELL! How did it fly / handle? $48.50 is definitely more shallow - just what we need / like! Looks like you need to add your own motor, servos, ESC, receiver, etc.... but $48.50 is a good price, for sure.
How much flight time? Would you recommend?
Brian
How much flight time? Would you recommend?
Brian
-
- Posts: 193
- Joined: Sun Mar 01, 2015 5:58 pm
- Location: Beaver Bank, NS
Re: Mirage 2000 (by Fly-Fly) project..
Brian,
I did the maiden flight at SP two Saturdays ago. For the first flights I flew it as a hand launch / belly lander. After several flights at Shannon, I put the wheels on and have been flying it from the BB Road paved runway. Here is how I have equipped it:
50 amp Aerostar ESC
Turnigy Typhoon 2215H 450 heli motor
4 servos - 1 elev, 1 aileron, 1 nose wheel (metal gear), 1 tail rudder
OrangeRX 6 Ch receiver
The kit comes with the EDF unit and a 3.17 mm motor shaft adapter, so one of my spare 450 heli motors worked nicely (3550 kv). I use 4S 2200 mAh Zippy Compact LiPos, but there is room (and CG range) for a slightly larger pack. My setup draws 43 amps at WOT and I would estimate a thrust to weight ratio of about 0.7 to 0.8. It's no rocket but certainly a nice scale jet. The roll and pitch rates are also very scale. The jet is very stable in the air with the recommended CG (marked on the underside of the wing). I get 2:30 minutes of flight time with my style of flying (loops and rolls).
I would recommend this kit in fact I am thinking of ordering a spare for this price. I got free Fedex ground shipping from the US warehouse (with a couple of 4S LiPo packs). If you get this kit I would highly recommend doing the tail rudder mod as it helps the jet track better during turns.
Jeff
I did the maiden flight at SP two Saturdays ago. For the first flights I flew it as a hand launch / belly lander. After several flights at Shannon, I put the wheels on and have been flying it from the BB Road paved runway. Here is how I have equipped it:
50 amp Aerostar ESC
Turnigy Typhoon 2215H 450 heli motor
4 servos - 1 elev, 1 aileron, 1 nose wheel (metal gear), 1 tail rudder
OrangeRX 6 Ch receiver
The kit comes with the EDF unit and a 3.17 mm motor shaft adapter, so one of my spare 450 heli motors worked nicely (3550 kv). I use 4S 2200 mAh Zippy Compact LiPos, but there is room (and CG range) for a slightly larger pack. My setup draws 43 amps at WOT and I would estimate a thrust to weight ratio of about 0.7 to 0.8. It's no rocket but certainly a nice scale jet. The roll and pitch rates are also very scale. The jet is very stable in the air with the recommended CG (marked on the underside of the wing). I get 2:30 minutes of flight time with my style of flying (loops and rolls).
I would recommend this kit in fact I am thinking of ordering a spare for this price. I got free Fedex ground shipping from the US warehouse (with a couple of 4S LiPo packs). If you get this kit I would highly recommend doing the tail rudder mod as it helps the jet track better during turns.
Jeff
MAAC 85077
Tarot 450 Pro V2, H-King Voltigeur, E-Flite Ultimate 2, BAe Hawk EDF, H-King Wargo MX2, E-Flite Timber X, E-Flite UMX Timber X, E-Flite UMX A-10, Eachine E160, Eachine E180, YX F180 V2, MJX Bugs 3
Transmitter: RadioMaster TX16S
Tarot 450 Pro V2, H-King Voltigeur, E-Flite Ultimate 2, BAe Hawk EDF, H-King Wargo MX2, E-Flite Timber X, E-Flite UMX Timber X, E-Flite UMX A-10, Eachine E160, Eachine E180, YX F180 V2, MJX Bugs 3
Transmitter: RadioMaster TX16S
- retiredVTT
- Posts: 5601
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
Re: Mirage 2000 (by Fly-Fly) project..
....getting closer...!
2018/10/22 00:01 Canada Delivery may be delayed due to labour disruption
2018/10/21 13:07 HALIFAX, NS Item processed
2018/10/21 12:09 HALIFAX, NS Item processed
2018/10/18 18:42 MISSISSAUGA, ON Item processed
2018/10/18 13:40 MISSISSAUGA, ON Item was released by Customs and is now with Canada Post for processing
2018/10/18 13:38 MISSISSAUGA, ON Item has arrived in Canada and was sent for further processing.
2018/10/15 18:51 USLAXA, USA International item processed in originating country
2018/10/15 18:51 USLAXA, USA International item has left originating country and is en route to Canada
2018/10/13 03:29 BELL GARDENS, USA Item processed
2018/10/13 02:10 91766, USA International item mailed in originating country
2018/10/22 00:01 Canada Delivery may be delayed due to labour disruption
2018/10/21 13:07 HALIFAX, NS Item processed
2018/10/21 12:09 HALIFAX, NS Item processed
2018/10/18 18:42 MISSISSAUGA, ON Item processed
2018/10/18 13:40 MISSISSAUGA, ON Item was released by Customs and is now with Canada Post for processing
2018/10/18 13:38 MISSISSAUGA, ON Item has arrived in Canada and was sent for further processing.
2018/10/15 18:51 USLAXA, USA International item processed in originating country
2018/10/15 18:51 USLAXA, USA International item has left originating country and is en route to Canada
2018/10/13 03:29 BELL GARDENS, USA Item processed
2018/10/13 02:10 91766, USA International item mailed in originating country
Bill
HEFA #5
MAAC #13708
HEFA #5
MAAC #13708
- bdg
- Posts: 1430
- Joined: Mon Mar 12, 2012 11:59 am
Re: Mirage 2000 (by Fly-Fly) project..
So close..... !!!!
- retiredVTT
- Posts: 5601
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
Re: Mirage 2000 (by Fly-Fly) project..
..arrived today in a thick cardboard box that still managed to get beat up in transit; keeping my fingers crossed until the grand opening on Friday!
Bill
HEFA #5
MAAC #13708
HEFA #5
MAAC #13708