LiPo disposal method (box cutter)
-
- Posts: 193
- Joined: Sun Mar 01, 2015 5:58 pm
- Location: Beaver Bank, NS
LiPo disposal method (box cutter)
Here is a video someone posted on the RC Groups Tundra forum. Pretty dumb idea, and even more so with bare feet...
https://www.youtube.com/watch?time_cont ... faAvaK7liA
https://www.youtube.com/watch?time_cont ... faAvaK7liA
MAAC 85077
Tarot 450 Pro V2, H-King Voltigeur, E-Flite Ultimate 2, BAe Hawk EDF, H-King Wargo MX2, E-Flite Timber X, E-Flite UMX Timber X, E-Flite UMX A-10, Eachine E160, Eachine E180, YX F180 V2, MJX Bugs 3
Transmitter: RadioMaster TX16S
Tarot 450 Pro V2, H-King Voltigeur, E-Flite Ultimate 2, BAe Hawk EDF, H-King Wargo MX2, E-Flite Timber X, E-Flite UMX Timber X, E-Flite UMX A-10, Eachine E160, Eachine E180, YX F180 V2, MJX Bugs 3
Transmitter: RadioMaster TX16S
- retiredVTT
- Posts: 5599
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
-
- Posts: 193
- Joined: Sun Mar 01, 2015 5:58 pm
- Location: Beaver Bank, NS
Re: LiPo disposal method (box cutter)
I see that now Bill. It looks like he decided to remove it from YouTube.
Last edited by wildblue30 on Sun Jul 22, 2018 8:55 pm, edited 1 time in total.
MAAC 85077
Tarot 450 Pro V2, H-King Voltigeur, E-Flite Ultimate 2, BAe Hawk EDF, H-King Wargo MX2, E-Flite Timber X, E-Flite UMX Timber X, E-Flite UMX A-10, Eachine E160, Eachine E180, YX F180 V2, MJX Bugs 3
Transmitter: RadioMaster TX16S
Tarot 450 Pro V2, H-King Voltigeur, E-Flite Ultimate 2, BAe Hawk EDF, H-King Wargo MX2, E-Flite Timber X, E-Flite UMX Timber X, E-Flite UMX A-10, Eachine E160, Eachine E180, YX F180 V2, MJX Bugs 3
Transmitter: RadioMaster TX16S
- bdg
- Posts: 1421
- Joined: Mon Mar 12, 2012 11:59 am
Re: LiPo disposal method (box cutter)
Hmmmm.... bare feet... LiPo.... dumb idea..... sounds intriguing!?
I understand that there are recycling depots through HRM for LiPo batteries.... Note that I haven’t done this yet.... These are really meant (I believe) for laptop type Li-Ion batteries, but I *believe* that LiPos are also suitable. I would suggest that these should be 100% discharged first - monitor the battery throughout and do this outside and connect a 12V car light bulb to the battery until it is discharged. Then you can disassemble the battery.... is this the best option? I don’t know and I am open to better suggestions!!!
I understand that there are recycling depots through HRM for LiPo batteries.... Note that I haven’t done this yet.... These are really meant (I believe) for laptop type Li-Ion batteries, but I *believe* that LiPos are also suitable. I would suggest that these should be 100% discharged first - monitor the battery throughout and do this outside and connect a 12V car light bulb to the battery until it is discharged. Then you can disassemble the battery.... is this the best option? I don’t know and I am open to better suggestions!!!
-
- Posts: 193
- Joined: Sun Mar 01, 2015 5:58 pm
- Location: Beaver Bank, NS
Re: LiPo disposal method (box cutter)
Brian,bdg wrote:
I understand that there are recycling depots through HRM for LiPo batteries.... Note that I haven’t done this yet.... These are really meant (I believe) for laptop type Li-Ion batteries, but I *believe* that LiPos are also suitable. I would suggest that these should be 100% discharged first - monitor the battery throughout and do this outside and connect a 12V car light bulb to the battery until it is discharged. Then you can disassemble the battery.... is this the best option? I don’t know and I am open to better suggestions!!!
I made an EC3 harness with a 12V light bulb just for that purpose, but it does take a while to discharge. I have also used the salt water method, as suggested by Greg at MSC. I cut the connectors off of the old LiPo and then place them in a bucket of salt water, then leave it to sit and discharge into the brine solution for 24 hours. I use an elastic band to keep the red wire lead away from the black lead to avoid a short circuit.
Jeff
MAAC 85077
Tarot 450 Pro V2, H-King Voltigeur, E-Flite Ultimate 2, BAe Hawk EDF, H-King Wargo MX2, E-Flite Timber X, E-Flite UMX Timber X, E-Flite UMX A-10, Eachine E160, Eachine E180, YX F180 V2, MJX Bugs 3
Transmitter: RadioMaster TX16S
Tarot 450 Pro V2, H-King Voltigeur, E-Flite Ultimate 2, BAe Hawk EDF, H-King Wargo MX2, E-Flite Timber X, E-Flite UMX Timber X, E-Flite UMX A-10, Eachine E160, Eachine E180, YX F180 V2, MJX Bugs 3
Transmitter: RadioMaster TX16S
- bdg
- Posts: 1421
- Joined: Mon Mar 12, 2012 11:59 am
Re: LiPo disposal method (box cutter)
Great idea. And I have certainly "heard" about immersing in an electrolytic solution to dissipate the final charge. I am sure that this whole topic has been discussed in the past and I don't want to shift the focus of this thread.... but the point is still timely....
This is the link to HRM and the recycling program: https://www.call2recycle.ca/batteries/. They specifically reference the Li-Ion batteries but not LiPo batteries.
The next question is: "What do you do with the cells / battery once it is safely discharged?". I have seen a reference online that Lipo is a "variant" of Li-Ion and therefore can be accepted through the recycling program identified above....
This is the link to HRM and the recycling program: https://www.call2recycle.ca/batteries/. They specifically reference the Li-Ion batteries but not LiPo batteries.
The next question is: "What do you do with the cells / battery once it is safely discharged?". I have seen a reference online that Lipo is a "variant" of Li-Ion and therefore can be accepted through the recycling program identified above....
- JohnOSullivan
- Posts: 1219
- Joined: Wed Oct 01, 2008 9:50 pm
- Location: Dartmouth, Nova Scotia
- Contact:
Re: LiPo disposal method (box cutter)
I have recycled LiPolys through Staples with my NiCads etc without problems.
John
MAAC #5401 L
MACI (Ireland) IRL#26
MAAC #5401 L
MACI (Ireland) IRL#26
- retiredVTT
- Posts: 5599
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
Re: LiPo disposal method (box cutter)
JohnOSullivan wrote:I have recycled LiPolys through Staples with my NiCads etc without problems.
At this link there are several locations given where batteries can be dropped off, such as Staples, Rona, and Princess Auto.
https://www.call2recycle.ca/locator/
Bill
HEFA #5
MAAC #13708
HEFA #5
MAAC #13708
-
- Posts: 193
- Joined: Sun Mar 01, 2015 5:58 pm
- Location: Beaver Bank, NS
Re: LiPo disposal method (box cutter)
MAAC 85077
Tarot 450 Pro V2, H-King Voltigeur, E-Flite Ultimate 2, BAe Hawk EDF, H-King Wargo MX2, E-Flite Timber X, E-Flite UMX Timber X, E-Flite UMX A-10, Eachine E160, Eachine E180, YX F180 V2, MJX Bugs 3
Transmitter: RadioMaster TX16S
Tarot 450 Pro V2, H-King Voltigeur, E-Flite Ultimate 2, BAe Hawk EDF, H-King Wargo MX2, E-Flite Timber X, E-Flite UMX Timber X, E-Flite UMX A-10, Eachine E160, Eachine E180, YX F180 V2, MJX Bugs 3
Transmitter: RadioMaster TX16S
- bdg
- Posts: 1421
- Joined: Mon Mar 12, 2012 11:59 am
Re: LiPo disposal method (box cutter)
That is a Darwin moment.... "don't try this at home" and then trying to extinguish the fire with his bare foot.... definitely not the "gold" standard for disposal...!
Brian
Brian