http://elmers.com/product/detail/e7501
Here is something I read today that might be of interest..how to strengthen foam with a glue product from ELMER's.
If you want to improve the colors on your Splendor and make it more hangar rash resistant, and strengthen areas subject to wear... without adding weight...use Elmer's PROBOND Advanced. I paint the nose area, leading edges and the hatch with it with a small paint brush. It goes on with a gray-blue color but dries crystal clear. It really enhances the colors and does toughen the foam. I do the same on my CZ Cub and Rare Bear
Bill
Toughen Foam with ProBond
- retiredVTT
- Posts: 5599
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
Toughen Foam with ProBond
Bill
HEFA #5
MAAC #13708
HEFA #5
MAAC #13708
- bdg
- Posts: 1421
- Joined: Mon Mar 12, 2012 11:59 am
Re: Toughen Foam with ProBond
I picked up a small bottle today.... I will try it out on some of my belly landers and perhaps water planes in preparation for flying from the snow..... brrr.....
I will report back on how well this works....
Brian
I will report back on how well this works....
Brian