LEMON Receivers..gotta love the name..!

[retiredVTT]

http://www.lemon-rx.com/shop/index.php? ... duct_id=93

..just ordered five full range lemon receivers for $26. plus $3.80 shipping.

..the miracle of electronics never ends,

Bill

[CF Av8or]

Wow, that's awesome, Bill. Do you have any experience with this brand of micro-Rx?

I've been using the HK Orange R410 with great results, but they are currently out of stock. They are also more expensive and only 4 vice 6 channels.

Vic

[retiredVTT]

Wow, that's awesome, Bill. Do you have any experience with this brand of micro-Rx?

I've been using the HK Orange R410 with great results, but they are currently out of stock. They are also more expensive and only 4 vice 6 channels.

Vic

This Lemon brand has been around awhile and from the RC threads seems to be ok. I saw one that John W had at the field awhile back and I believe John L was going to try one in a quad.
I 'll post a thread link when I find it.

Here it is..15 months old, 2300posts.. http://www.rcgroups.com/forums/showthre ... mon+receiv

Bill

[retiredVTT]

..in the above linked thread at post 1516, a method of strengthening the antenna attachment points is shown in pictures and only adds 1 gram...although I guess that represents a 25% increase in weight..LOL!


..and here's a link concerning "protection"..!
http://www.youtube.com/watch?v=6wielQUC ... e=youtu.be

Bill

[RocketManRC]

I have one on the HK/Techone Tristania that I built for indoor. As it turns out I've been flying it the length of the field at Shannon Park with no problems.

[CF Av8or]

Thanks, guys. I may have to order me some of them...

Vic

[retiredVTT]

My LEMONS arrived today..!

Bill

[retiredVTT]

There is a chance that you might for one reason or another LOSE the orientation of the pins, so here is a list of them.

In picture #1 above, you can see the BIND plug, attached to the bottom pin.

They go in this order, top to bottom:

Aux,
Gear,
Rudder,
Elevator
Aileron,
Throttle,
Bind.


Bill

[retiredVTT]

Binding:

https://www.youtube.com/watch?v=FZsHGEW ... e=youtu.be



1) Plug bind plug to the receiver.

2) Provide power to the unit.

3) Enable bind mode in transmitter and ensure distance separation of 2 meters from receiver.

4) Remove bind plug.

[retiredVTT]

http://witespyquad.gostorego.com/receiv ... d-pin.html

This supplier is in the US and sells a five pack of the 6 channel receiver for $27.00 plus shipping...so very close to the overseas price...and he takes Paypal.


Bill