AUW (so far) -3.5 oz
Motor - E-Flite park 250
ESC - Electrifly SS-8
Servos - Futaba 3114
Reciever - Berg Microstamp
Battery - 2 cell lipo, no name, 350ma
Prop - GWS 7x3.5 to start-------8x4
- built with foam safe ca and a bit of epoxy for the stiffeners
- Cheap packaging for shipping resulted in many dents, creases, dings, and 2 cracks. All were repaired
- Feels very fragile
- Working on setting up the "pull pull" for the elevator and rudder
- Lightest plane I have ever built or flown........I already said goodbye to her
- Added extra cf stiffener to the elevator
- CG is as per instructions and lateral balance only required 3 dots of CA
- Motor mount taped on.......feels very secure
- Hopefully will able to test her at the next indoor
- Should have ensured the gear struts located directly on top of the leading edge stiffener. Hopefully they wont poke through the wing on a landing
- Approx 2.5-3.0 hrs build time to this stage. Expect Destruction time significantly less....
Steve
