Micro F-22
-
- Posts: 574
- Joined: Tue Mar 16, 2010 10:53 pm
Re: Micro F-22
Really nice job Steve. Gives me inspiration to get working on that ultra micro meat tray design for an F-117 Night Hawk.
- steve
- Posts: 999
- Joined: Thu Oct 02, 2008 10:58 pm
Re: Micro F-22
Thanks Jeff...
Myself and Michael really enjoy building. He especially likes the Finishing and painting. If it were not for him, I suspect my foam models would all remain white....
Good luck on your meat tray build....
Steve
Myself and Michael really enjoy building. He especially likes the Finishing and painting. If it were not for him, I suspect my foam models would all remain white....
Good luck on your meat tray build....
Steve
Steve
- steve
- Posts: 999
- Joined: Thu Oct 02, 2008 10:58 pm
-
- Posts: 574
- Joined: Tue Mar 16, 2010 10:53 pm
Re: Micro F-22
Well, at least the steaks were quite tasty.
I've nearly convinced myself that v-tail mixing on the DX6i will work for the linear servos that are built into the AR6400 receiver. The issue I'm wrestling with in my head is how to rig the elevons to those servos but I'm close to a solution using a single piece of music wire and some adhesive.
Next I have to decide which bird to cannibalize... will it be the P-51, Su-26, or the 4-site?
I've nearly convinced myself that v-tail mixing on the DX6i will work for the linear servos that are built into the AR6400 receiver. The issue I'm wrestling with in my head is how to rig the elevons to those servos but I'm close to a solution using a single piece of music wire and some adhesive.
Next I have to decide which bird to cannibalize... will it be the P-51, Su-26, or the 4-site?