https://innov8tivedesigns.com/
..the folks at Innov8tive Designs now carry a line of 3D printed Motor Mounts for electric models; these should help you get the proper distance between model and prop, when your using a cowl or need to get the motor adjusted to get the correct CG.
..another Innov8tive product from the "BadAss" guys..!
New line of 3DPrinted motor mounts for electric models
- retiredVTT
- Posts: 5601
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
New line of 3DPrinted motor mounts for electric models
Bill
HEFA #5
MAAC #13708
HEFA #5
MAAC #13708
-
- Posts: 78
- Joined: Sat Jul 27, 2019 6:33 pm
Re: New line of 3DPrinted motor mounts for electric models
Thanks for the link Bill. That is a keeper in my Favourites. I checked out the 3D motor mounts and I thought " I can print them " and I already have for my 3D printed Das ugly stick, complete with down/offset thrust angle.
The secret of flight is to aim at the ground and MISS