Looking for a pair of 2 3/4" or 3" light wheels (not GWS)
for an electrified four star fourty.
3" light wheels
- retiredVTT
- Posts: 5599
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
Re: 3" light wheels
Wow..you have an electric 4*40..excellent, I have read about those...very positive writeups....I had got a pair of 3" foam wheels for $4.90 last week from Zebra Hobby in Calgary..
http://www.zebrahobby.ca/cgi-bin/cp-app ... OME:wheels
You can have them...as John O'sullivan says to me.."just replace them"...!
Let me know and I'll throw them in my new fangdangled flight box..!
They will be in drawer # 3..!
Bill
http://www.zebrahobby.ca/cgi-bin/cp-app ... OME:wheels
You can have them...as John O'sullivan says to me.."just replace them"...!
Let me know and I'll throw them in my new fangdangled flight box..!
They will be in drawer # 3..!
Bill
Bill
HEFA #5
MAAC #13708
HEFA #5
MAAC #13708
-
- Posts: 58
- Joined: Fri Apr 10, 2009 10:09 pm
Re: 3" light wheels
OK, Bill I will take them. I also will need wheel axles for them if you have same, thanks, Tony
- retiredVTT
- Posts: 5599
- Joined: Wed Oct 01, 2008 9:59 pm
- Location: Bedford, NS,CANADA
- Contact:
Re: 3" light wheels
Probably small bolts 1/8" or 3mm diameter. I assume they're going through aluminum landing gear.
These wheels are marked "indoor foam" and the center hole is a bit smaller than 1/8" so you may half to drill them out.
How heavy is the 4*40...if its much over 24 ozs these may be too light.
I'll bring them along on the weekend.
I have the Ryan that you sold me ready for more flightime this weekend.
Bill
These wheels are marked "indoor foam" and the center hole is a bit smaller than 1/8" so you may half to drill them out.
How heavy is the 4*40...if its much over 24 ozs these may be too light.
I'll bring them along on the weekend.
I have the Ryan that you sold me ready for more flightime this weekend.
Bill
Bill
HEFA #5
MAAC #13708
HEFA #5
MAAC #13708