I have two older Futaba S3003 servos that I am thinking of using in a 4 to 5 lb sports type plane. I need two servo arms - X or horizontal and 4 brass eyelets
to be able to use these servos. Can anyone help?
Servo arms and brass eyelets for Futaba S3003 servos
-
Sirantony
- Posts: 58
- Joined: Fri Apr 10, 2009 10:09 pm
-
Coyote
- Posts: 495
- Joined: Fri Sep 24, 2010 10:59 pm
- Location: Dartmouth, Cole Harbour
Re: Servo arms and brass eyelets for Futaba S3003 servos
I have 2 X servo arms for Futaba S148s. I'm assuming they are compatible w S3003 (I used S148 servos in my nitro 4lb)?
If they are compatible, they're yours
If they are compatible, they're yours
-----------------------------------------------------
Marc "Coyote" Cayouette
Halifax Electric Flyers Association (HEFA) # 054
MAAC #35128
DX9
Marc "Coyote" Cayouette
Halifax Electric Flyers Association (HEFA) # 054
MAAC #35128
DX9
-
steve
- Posts: 999
- Joined: Thu Oct 02, 2008 10:58 pm
Re: Servo arms and brass eyelets for Futaba S3003 servos
Marc,
The servo arms for the FP-S148 have the same spline as the S3003. I will put some brass eyelets and the matching rubber grommit pieces in my box and have them with me the next day at the field. Between that and with what you have, we should be able to get Tony rolling with what he needs....
Steve
The servo arms for the FP-S148 have the same spline as the S3003. I will put some brass eyelets and the matching rubber grommit pieces in my box and have them with me the next day at the field. Between that and with what you have, we should be able to get Tony rolling with what he needs....
Steve
Steve